- • Design pressure/Maximum abnormal pressure (DP/MAP) 800 PSIG
- • Construction: all-forged brass
- • Seat material: PTFE
- • Specially designed secondary seat backs up primary seat
- • Copper gasket between body cap and body assures positive shut-off
- • Continuous operating temperature (COT): -40°F to 400°F (-40°C to 204°C)
- • Low pressure drop “Y” design
- • Tube extensions permit valve to be soldered without disassembly
- • All UL® and cUL Recognized
- • Patent No. 3,438,391
- • Recommended bonnet torque: 802/803-45 ft. lbs., 804-75 ft. lbs.
- • Suitable for many applications, such as hot gas defrost
- • Comes with standard 1/2-lb. differential spring
- • For special higher differential springs for all check valves, please consult factory.
- • CRN 0C8195.5
- • Design pressure/Maximum abnormal pressure (DP/MAP) 800 PSIG
- • Construction: forged brass
- • Seat material: PTFE
- • Specifically designed secondary seat backs up primary seat
- • Copper gasket between body cap and body assures positive shut-off.
- • Continuous operating temperature (COT): -40°F to 400°F (-40°C to 204°C)
- • Low pressure drop “Y” design
- • Stainless steel spring
- • UL® and cUL Recognized
- • CRN 0C8195.5
- • Copper connection sizes 3/8” through 2 5/8”
- • Hermetically sealed spun copper body
- • Thirty-mesh screen to protect seat surface from debris
- • Continuous operating temperature (COT): -40°F to 300°F (-40°C to 149°C)
- • Full range of sizes
- • Magnetic actuation
- • Arrow indicates direction of flow
- • Can be installed in any position
- • Minimal pressure drop
- • UL® and cUL Recognized
- • Proprietary seat design minimizes leaks
- • CRN 0C8195.5
- • 900MA Series In-Line Check Valves should not be used with differential pressures above 350 psi.
- 802B Check Valve Series
- Available Replacement Parts:
- Gasket Kit
- Seat Kit