- • All-brass one-piece shell, significantly better than steel
- • 700 PSIG working pressure
- • May be silver brazed for permanent installation and protection of system
- • Minimal space required for installation
- • No paint to peel
- • No rust or corrosion
- • Single cartridge design
- • Access valve (1/4” SAE) readily permits pressure drop readings
- • Corrosion-resistant stainless steel bolts permit easy access for changing of cartridges
- • No welds or solder joints, no chance of leaks!
- • UL® and cUL Listed
- F Series
- Replaceable Filter Cartridge
- • Super-pleated filter media provides up to twice the filter area of any other pleated or non-pleated filter cartridge today
- • Traps solid contaminants down to 10 microns in size
- • Integral end rings are permanently bonded to filter media
- • Stainless steel helical wire spring within the filter eliminates the possibility of cartridge collapse under normal operation conditions
- DF Series
- Replaceable Dual-Purpose Filter Plus Drier Cartridge
- • Molded solid core of specially blended molecular sieve and activated alumina produces a dual-purpose suction line filter/drier of unusually high efficiency and capability
- • Can be used for system clean-ups or on a permanent use basis
- • Solid contaminants never reach the desiccant core
- • Moisture and acids are efficiently removed from the refrigerant stream
- • All filters or filters plus driers should be changed when pressure drop across cartridge increases significantly
- • All filters or filters plus driers are rated in accordance with ARI standard 730
- • Always follow compressor manufacturer’s recommendations
- CFA Uni-Form Shells
- Available Replacement Parts:
- Shell Replacement Kit
- Replacement Flange Gaskets